Scope 5 GHG Resource Library Maintenance


Scope 5 makes available a broad range of resource libraries to Scope 5 users. In general, these libraries hold descriptions of various activities (and the units in which the corresponding activity data is expected) as well as various impacts and the conversion factors by which each impact is calculated. An important subset of these resource libraries concern Greenhouse Gas (GHG) impacts. These GHG libraries quantify GHG emissions (in the form of emissions factors) for a variety of activities.

The emissions factors provided in our GHG libraries are sourced from reputable authorities such as the GHG Protocol (a.k.a. WRI)  and The Climate Registry. Often, these authorities update their emissions factors, or recommend updates to global warming potentials (GWPs) that are incorporated into emissions factor calculations. (The following conversation discusses emissions factors but applies equally to GWPs).

A subset of Scope 5's standard GHG resource libraries is maintained by Scope 5. This means that we periodically update our libraries to reflect updates published by the authorities from which our libraries are sourced. As such, Scope 5 users can use Scope 5 to generate emissions inventories with the knowledge that the emissions factors are reputable and reasonably up-to-date. The purpose of this article is to explain our maintenance protocol and the consequences of using resources from maintained libraries.

The following table lists the standard GHG libraries that we maintain:

Scope 5 Name


Publication Date of Most Recent Update from Authority Integrated into Scope 5


The Climate Registry

April 2020

Scope-2 Supplier Specific

The Climate Registry

Edison Electric Institute (EEI)

TCR: Date unavailable;

2018 and 2019 Factors available as of March 2021 in Scope 5

EEI: November 2020

GHG Protocol

(Formerly WRI)

The Greenhouse Gas Protocol

World Resources Institute

May 2015 & March 2017


Environmental Protection Agency

February 2021

Selected EPA Hub Tables

Environmental Protection Agency

April 2021


Environmental Protection Agency

November 2020


Environmental Protection Agency

October 2010

Fugitive Gases (AR5)

The Greenhouse Gas Protocol

June 2017

CBECS Office Buildings





CBECS: May 2016

eGRID: February 2021

TCR: April 2020

EPA: March 2020

International Electricity

International Energy Agency (IEA)

The Greenhouse Gas Protocol (GHGP) for Chinese regions

Government of Canada for Canadian Provinces

 IEA: 2020

GHG Protocol: 2014 

Government of Canada: 2020

Electricity (Residual Mix)

Association of Issuing Bodies (AIB)


AIB: 2020 

IEA: 2020

Green-e: 2020

eGRID: 2020

International Estimated Electricity

International Energy Agency (IEA)

Government of Canada for Canadian Provinces


IEA, Gov. of Canada: 2020

CBECS:May 2016


Selected DEFRA Tables




Estimated Electricity (Residual Mix)



AIB: 2020 

CBECS:May 2016

Please check back here at any time for status regarding maintained libraries and updates. If your organization would like to see additional resource libraries maintained by Scope 5, please contact us at to discuss your needs. 

Maintenance Schedule

Scope 5's maintained libraries are updated in response to updates from the corresponding source authority. As a policy, Scope 5, reviews its libraries on a quarterly basis.  This review is two-fold; a technical review, and a review of ad-hoc communications and requests from our user community.

Our technical review amounts to monitoring communications from source authorities (EPA, The Greenhouse Gas Protocol, etc.) and other industry leaders to identify updates. In addition, inquiries are sent periodically to the Scope 5 executive team, sales and marketing, and to Scope 5 account managers, asking for feedback from customers and other stakeholders to learn of any deficiencies or requests for new libraries. The Scope 5 library maintenance team works with Scope 5 management to decide when to add to our list of maintained libraries.

If a deficiency is found at any time, in any library, Scope 5 makes every effort to update and correct library emission factors. We strongly encourage feedback from the Scope 5 user community, as our partners in providing and maintaining a current and expansive library database.

Maintenance Policy

As of May 2020, Scope 5’s policy for maintaining emissions factors is to:

  • Add an additional emissions factor set to each resource in the library, even when the numbers remain unchanged in the source document, with each library update. This clearly denotes that the resource has been maintained.
  • Date new emissions factor sets with the effective date provided by the publication. If that is not explicitly listed, Scope 5 will use the first day of the update’s publication year. For example, EPA’s March 2020 Emissions Factors note they were last updated on March 26, 2020. Because this is not directly referenced as the effective date, Scope 5 considers January 1, 2020 to be the effective date of the emissions factors in this publication.

Understanding Discrepancies

Our users benefit by using resources from our maintained libraries in that they do not need to track and update emissions factors themselves in order to produce defensible GHG emissions inventories. However, users choosing to do so must be aware of the following caveats.

The world of emissions factors is dynamic - various authorities source their emissions factors from other authorities which in turn source emissions factors from yet other authorities. Some of these authorities pick up updates from some but not all of their sources. There is no perfectly correct set of emissions factors. Our goal is to provide defensible emissions factors. Above all, we aim to be transparent regarding our emissions factors.

This means that on any given day a subset of emissions factors in the Scope 5 libraries may differ from emissions factors in a certain authority's library. Our promise to our users is that our emissions factors are equivalent to or are reasonably derived from those published by the authority (or the authority from which it drew its emissions factors) on a reasonably recent date. In addition, we show the source(s) from which our emissions factors derive in the application (and in downloaded CSVs of each maintained resource library except for the International Electricity library). Further detail is provided in the articles corresponding to each resource library in this knowledge base.

Users should consider the following dates when producing any emissions inventory:

  1. Activity Date - the date on which the emitting activity occurs (for example, the date on which a certain volume of fuel was combusted or certain amount of electricity was used).
  2. Effective Date - the activity date for which a set of emissions factors should be applied to activity records. 
  3. Publication Date - the date on which the authority publishes a certain emissions factor or an update to that emissions factor.
  4. Current date - the date on which an emissions inventory is generated.

Consider the following example. In November of 2015 (the publication date), the EPA published an update to the eGrid electricity emissions factors. This update included emissions factors with an effective date of 2012. 

So - if a user were to generate an emissions report today (the current date, 2/12/2016) for 2014 electricity activity, they would be applying the 2012 emissions factors. Had the report been generated in October of 2015 (just a few months ago), they would have applied the most recent emissions factors available at that time (with an effective date of 2010). As a result, the two emissions reports would produce different numbers.

This example illustrates an important point - when using maintained libraries, users may find that emissions resulting from the same activity change based on when a report was run. While this can be disconcerting, it is readily explained and it generally reflects improved knowledge regarding emissions factors. 

Most often, users run emissions reports early in each year, for activity that occurred in the previous calendar year. In the example above, our 2014 emissions report would probably have been run prior to November 2015 and as a result, would have used the 2010 emissions factor set. Our 2015 emissions report would be run early in 2016 and would use the 2012 emissions factor set. There would be no discrepancy with which to be concerned because each of the two reports are for emissions resulting from activity in different years.

The problem occurs when users run multiple reports over time, that quantify emissions for multiple years (often including some base year). In this case, results for the same year can differ depending on when the report was run. Users must be aware of this eventuality when conducting audits or publishing reports to their stakeholders and should be prepared to explain differences that arise from updates to emissions factors. We recommend that whenever a user runs a report intended for external consumption, they should use the CSV download link (in the top right corner of each resource library page) to record the sets of emissions factors and sources that were used to generate the report.

Have more questions? Submit a request


Powered by Zendesk